EDUP EP-AB003 2.4Ghz 8W Broadband Amplifier
Features:
Low-noise receive gain
Signal activity LED indicates
High Gain, High Value, High Performance
Maximum output power of 8000mW
Plug-and-play, Easy installation, no driver needed
Specification (according to the manufacturer):
Operation Range: 2400-2500 MHz.
Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing.
Frequency Response: ± 1dB over operation range.
Input Power: 3dBm (Min.)-20dBm (Max.).
Output Power: 8000mW/39dBm nominal
Transmit Gain: 16-18dB nominal.
Receiver Gain: 10-12dB.
Receive Noise Figure: 3.0dBm nominal.
Operating Temperature: -40 to 70 degree.
Operating Humidity: Up to 95% relative humidity.
Connector: SMA Receptacle, 50 ohm.
Material: Cast Aluminium
Power supply:
INPUT:100-240V 0.3A 50/60HZ
OUTPUT: 12V 1.5A
Mit EU-Stecker
Achtung! Die 8W sind Herstellerangaben und werden nur im WIFI-Bereich eingehalten.
Bei 20dBm (0,1W) Input beträgt die Ausgangsleistung nur ungefähr 33dBm (2,1W).
Verkauf nur an lizensierte Funkamateure!
Versandgewicht: | 0,52 Kg |
Artikelgewicht: | 0,52 Kg |